An introduction of the electronic display unit on the battery metal cutting saw DLY-10CS1- Yongkang Yike Saw Industry Co., Ltd.

An introduction of the electronic display unit on the battery metal cutting saw DLY-10CS1

Author: admin / 2022-11-14

CAUTION:

Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.

To prevent the switch trigger from accidentally pulled,the lock off button is provided.

To start the tool, depress the lock-off button at➊and pull the switch trigger at❷.

Release the switch trigger to stop. After use, always press in the lock off button.

The tool speed can be infinitely adjusted between 1.0 m/s (197 f./min.) and 1.7 m/s (335 f./min.) by pressing the adjusting button. Higher speed is obtained when the number 5 is displayed; lower speed is obtained when number 1 is displayed. Select the proper speed for the workpiece to be cut.

Indicator of remaining power

Remaining power is 100% when all three indicators a/b/c are Iit;

Remaining power is 75% when two indicators b&c are Iit;

Remaining power is 50% when only one indicator c is lit